Our fronts are adapted to the PAX system from IKEA. They come in the following sizes (width x height) 50×201 cm, 50×236 cm, 100×201 cm and 100×236 cm. The PAX carcasses come in different depths, and our fronts fit all size depths described above.

We have chosen to make the front panels a little bit longer so that they cover a little more of the shelf. This doesn’t affect functionality. The only visual difference is that wardrobe looks more presentable. Our wardrobe fronts have about 2 cm gap from the floor, while the IKEA’s entire shelf is shown.

Yes, this can be done but the job should be carried by a carpenter. The wardrobe will get higher if you add a leg and it can be harder to get things that are at the very top of the wardrobe. This is not something we recommend.

No, we do not offer them. Noremax offers only hinged door for wardrobes.

In a Pax wardrobe, 201cm height, the position of the hinges – Starting from the top:

Top hinge hole No: 3/4

Middle hinge hole No: 29/30

Bottom hinge hole No: 56/57 or 3/4 starting from the bottom

Please note our wardrobe doors will have an arrow inside the middle hinge hole pointing at the direction of the lower hinge hole where the bottom hinge should be placed.

That arrow will be spray painted but it will be still visible. For darker colours, this arrow will be covered with a small piece of tape, so the paint won’t cover the arrow completely. We will pull that tape out before sending doors but in case this wasn’t done, you can take a tape off on-site to reveal the arrow.

This marking and the hinge holes layout will show you the way the left and right doors should be installed. IKEA’s doors are installed the same way.
Hinges will need to be purchased at IKEA or from Noremax. Hinges for our Linoleum fronts needs to be purchased from us due to the door thickness.

If you have any doubts or questions, please contact us.

In a Pax wardrobe, 236 cm height, the position of the hinges – Starting from the top:

Hinge 1, hole No: 3/4

Hinge 2, hole No: 32/33

Hinge 3, hole No: 38/39

Hinge 4, hole No: 67/68 or 3/4 starting from the bottom

Please note our wardrobe doors will have an arrow inside the middle hinge hole pointing at the direction of the lower hinge hole where the bottom hinge should be placed.

That arrow will be spray painted but it will be still visible. For darker colours, this arrow will be covered with a small piece of tape, so the paint won’t cover the arrow completely. We will pull that tape out before sending doors but in case this wasn’t done, you can take a tape off on-site to reveal the arrow.

This marking and the hinge holes layout will show you the way the left and right doors should be installed. IKEA’s doors are installed the same way.
Hinges will need to be purchased at IKEA or from Noremax. Hinges for our Linoleum fronts needs to be purchased from us due to the door thickness.

If you have any doubts or questions, please contact us.

Noremax uses good quality BLUM hinges with mechanical bearings (no oil) unlike Ikea which uses oil motor hinges. Blum hinges have an opening angle of 110 degrees with an integrated damper. A mounting plate is also included to attach these to the frame in the correct position. Our Blum hinges will fit the PAX hinge holes.